Don, you put me on the spot here.
I have never tried a 44' OCFD.
I have tried both the 66' and 132' OCFD fed at that split, fed with open
wire, but not the 44'.
I don't like to comment on things that I have not actually tried myself.
73 - Rick, DJ0IP
(Nr. Frankfurt am Main)
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Don Jones
Sent: Sunday, September 14, 2014 5:47 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Zepp?
I like the 44ft doublet idea.
But I would like to try the OCF method mentioned by Rick DJ0IP.
Sounds like for a 44 ft OCF antenna the feed point would be 19ft/25ft.
Correct?
Hoping I can get 10M to play better and would like better efficiency as
compared to a 34 doublet on 30M.
73, Don
On 9/13/2014 7:29 PM, Augie "Gus" Hansen wrote:
>
> <snip>
> Elecraft sells a nice low-power balun that is switchable as 1:1 or
> 4:1. I have used it for field/portable ops, but it's usually set to
> 1:1 for the antennas I use (44' or 88' doublet).
>
> 73,
> Gus
> <snip>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|