Alan
I was looking at some Achieves and found that Jerry, KG6TT had a similar
problem with a 962, in Dec.2004. He used a Radio Shack #276-1185 Full Wave
Bridge Rectifier, 25A for $3.29 at that time. He said he found the specs.
doing a Google search and checked with Radio Shack and it was a drop in
replacement. Hope this helps.
I do have a 961 but it goes with my Omni VI Plus which I've put up for
sale. Good Luck. Jim K7IKN
On Sat, Sep 20, 2014 at 7:30 PM, Alan via TenTec <tentec@contesting.com>
wrote:
> I made a recent comment as to how well my PARAGON II has been performing
> over the years then Friday evening there was a "pop" and a dimming of the
> 961 PS red light and that smell of smoke. Removing the cover a local ham
> noted immediately the bridge rectifier board was fried.
>
> I have been reading thru the TenTec List's ARCHIVES searching for
> guidance how to better assess the situation and effect repairs.
>
> The limited information notes the board is no longer available so some
> have attempted to rebuild the board with limited success. Also I am not
> sure
> what caused the problem and how far the damage extends beyond the board. I
> am afraid that the fact I am one of those "appliance operators' may be
> showing. Monday morning a call to TenTec seems in order however I was
> wondering
> if someone on the LIST could point out warning signs of impending failure
> I
> should have been alerted to and if rebuilding the bridge circuit ( or
> replacing ) is viable option. Were there modifications to minimize this
> failure
> from occurring?
>
> REPLACEMENT 961; Regardless if repairable or not , I want to purchase a
> 961 PS...please contact me off-List if you have one for sale
>
>
>
> Regards
>
> Alan KB7MBIreplacement 961 PS
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|