[TenTec] Eagle 9MHz tap questions...

[Katz Ajamas <ajamas.rn@gmail.com>]

I assembled a nice piece of well shielded RG58 with 2 RCA plugs to replace
the "audio" cable I was using between the SW RX and the 9MHz tap. With the
audio cable it was as I had an antenna connected to the SW RX :-). Sure
enough, there is 9MHz there. The signal is way more than 15db down which I
attribute to a poor match to the SW RX input.

*I'd still like to see the tap, where and how, on a schematic diagram.*

-Bob
ah7i/w4
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec