| 
Clayton,
I deleted the version I was running and installed the current 
version .  The program is working good.  The only thing not working is 
the rig control to my eagle.  It could be I just don't have the right 
parameters for the radio input. 
    I have:     Radio Desc: Ten Tec Eagle          Host: Localhoast
Rig Model: 1613 Ten-Tec TT-599 Eagle Device :  
/dev/ttyusb0     Poll Rate:  2     Port number: nothing*
Baud: 57600   Data bits:  8     Stop bits: 1     
parity: None     Handshake:  default 
                       DTR: off     RTS: On
* I would assume I need a port ,I just don't know 
what it would be. New to linux.  I'm wondering if it's like windows 
needing a special driver for the eagle because there is no serial port 
only usb.
Carl,
I need to get wine working .  I tried it and just wasn't able to 
get anywhere.  It's probably me not knowing linux.  I figured I would 
get things working one problem at a time.  I fully plan to use the 
software I have from you. 
    Thanks to both of you for your help and anymore you may send my way,
            Lee,   N3LPJ
On 6/12/2016 8:11 PM, Clayton Brantley via TenTec wrote:
Lee: You might try CQRLog written in Ubuntu Linux.  There are the DEB packages 
that should work
for most all flavors on Linux.  The rig control has the Eagle included and 
should work for you as mine
does with the Omni VI+.  The best I remember, there are a few things that you 
might have to do to make
it run in Mint, but users have report CQRLog works for them.
Here is the link  www.cqrlog.com  That will let you look it over.
73 Clayton N4EV
--------------------------------------------
On Sun, 6/12/16, leen3lpj <leen3lpj@nep.net> wrote:
  Subject: [TenTec] Linux a and TenTec Eagle
  To: TenTec@contesting.com
  Date: Sunday, June 12, 2016, 6:40 PM
Hello everyone,
  
       Is anyone running linux and also 
  using an eagle?
I'm trying but my laptop doesn't 
  have a serial port.  I guess I
  need a driver to make the radio connect via a usb port as in
  windows.
  I've tried wine that isn't working too well.
The computer is only linux and 
  isn't dual booted.
The operating system is linux mint 
  17.3.
Thank You,
  
       Lee,    N3LPJ
  
  
  _______________________________________________ 
  TenTec mailing list
  TenTec@contesting.com
  http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
 
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
 |