Go to the CQRLog site and look for the questions page and see answers there.
Clayton N4EV
--------------------------------------------
On Mon, 6/13/16, leen3lpj <leen3lpj@nep.net> wrote:
Subject: Re: [TenTec] Linux a and TenTec Eagle
To: "Clayton Brantley" <clayton_n4ev@yahoo.com>, "Discussion of Ten-Tec
Equipment" <tentec@contesting.com>
Date: Monday, June 13, 2016, 7:28 AM
Clayton,
I deleted the
version I was running and installed the current
version . The program is working good. The
only thing not working is
the rig control
to my eagle. It could be I just don't have the right
parameters for the radio input.
I have:
Radio Desc: Ten Tec Eagle Host:
Localhoast
Rig Model: 1613 Ten-Tec TT-599 Eagle
Device :
/dev/ttyusb0
Poll Rate: 2 Port number:
nothing*
Baud: 57600 Data
bits: 8 Stop bits: 1
parity: None Handshake:
default
DTR: off RTS: On
* I would assume I need a port ,I just
don't know
what it would be. New to
linux. I'm wondering if it's like windows
needing a special driver for the eagle because
there is no serial port
only usb.
Carl,
I need to get
wine working . I tried it and just wasn't able to
get anywhere. It's probably me not
knowing linux. I figured I would
get
things working one problem at a time. I fully plan to use
the
software I have from you.
Thanks to
both of you for your help and anymore you may send my
way,
Lee, N3LPJ
On 6/12/2016 8:11 PM, Clayton
Brantley via TenTec wrote:
> Lee: You
might try CQRLog written in Ubuntu Linux. There are the
DEB packages that should work
> for most
all flavors on Linux. The rig control has the Eagle
included and should work for you as mine
> does with the Omni VI+. The best I
remember, there are a few things that you might have to do
to make
> it run in Mint, but users have
report CQRLog works for them.
>
> Here is the link www.cqrlog.com That
will let you look it over.
>
> 73 Clayton N4EV
>
>
--------------------------------------------
> On Sun, 6/12/16, leen3lpj <leen3lpj@nep.net>
wrote:
>
> Subject: [TenTec] Linux a and
TenTec Eagle
> To: TenTec@contesting.com
> Date: Sunday, June 12, 2016,
6:40 PM
>
> Hello everyone,
>
>
Is anyone running linux and also
> using an eagle?
>
>
I'm trying but my laptop doesn't
> have a serial port. I guess
I
> need a driver to make
the radio connect via a usb port as in
> windows.
> I've tried wine that
isn't working too well.
>
>
The computer is only linux and
> isn't dual booted.
>
>
The operating system is linux mint
> 17.3.
>
>
Thank You,
>
> Lee, N3LPJ
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
> TenTec mailing list
>
TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|