I might have to pick up some of the TriFlo to use this next week when we
will PMing a 440 volt Power panel. The old grease drys out on the main
switch and makes it hard to reset the thing.
Thanks to the "greasers" here for the info.
73 Clayton N4EV
--------------------------------------------
On Fri, 7/1/16, Stuart Rohre <rohre@arlut.utexas.edu> wrote:
Subject: Re: [TenTec] Tri-Flo lubricant
To: tentec@contesting.com
Date: Friday, July 1, 2016, 5:24 PM
One of the problems with suggesting
other petroleum oils or greases, is
most will eventually dry out to a gummy and sticky mess in
PTO use.
Tri Flo has the ability to dissolve the dry, gummed up
grease TT used,
and provide in addition, the Teflon lubrication as well,
that will
remain after the oil has evaporated. It won't seize up
and stick the
moving parts.
-Stuart
K5KVH
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|