Simple test!
You’d need a second receiver, or transceiver. Set it to 80 meters LSB
Connect the 515 into dummy load and set to 80 meters NORMAL.
Set both to same frequency i.e. 3.890 MHz LSB
Plug in headphones into second receiver and listen to yourself as you talk on
the 515.
Are you able to understand yourself?
Good!
Now switch, and put the second transceiver into the dummy load and transmit
while you listen on the 515. Making sure you’re both on LSB
Are you able to understand yourself on the 515?
Good!
If not, then you’ll need to look closer. I’m betting there is nothing wrong.
Mike, WB8VGE
Mike Bryce, WB8VGE
the heathkit shop
SunLight energy systems
J e e p
o|||||||o
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|