2% is nothing, you'll be absolutely fine
73, Barry N1EU
On Tue, Oct 25, 2016 at 5:56 PM, Rod Greene <w7zrc@yahoo.com> wrote:
> Barry,
>
> Sorry if this appears as a repeat message - but I didn't see my previous
> reply come through. Anyway, that fixed it. I can go down as low as 2% but
> not any less.
>
> Thanks much! 73, Rod/w7zrc
>
>
> ------------------------------
> *From:* Barry N1EU <barry.n1eu@gmail.com>
> *To:* Rod Greene <w7zrc@yahoo.com>; Discussion of Ten-Tec Equipment <
> tentec@contesting.com>
> *Sent:* Tuesday, October 25, 2016 3:32 PM
> *Subject:* Re: [TenTec] Audio Popping - Orion II with V3.033xe
>
> Try adding 10% CW QSK Delay in the CW Menu.
>
> 73, Barry N1EU
>
> On Tue, Oct 25, 2016 at 5:26 PM, Rod Greene via TenTec <
> tentec@contesting.com> wrote:
>
> All,
> I just loaded version 3.033xe and have entered all my custom settings. I
> know I'm a little late trying this update. Anyway, all seems to be working
> okay except when keying CW. When the key breaks (when I let up on the key),
> I get a pop in the audio monitor. Happens all the time even with the S-Tone
> at zero.
>
> Is this a known problem and do I just need to go back to version 3.033xd
> to correct it, or have I missed a setting somewhere?
> Thanks and 73, Rod/w7zrc
> ______________________________ _________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/ mailman/listinfo/tentec
> <http://lists.contesting.com/mailman/listinfo/tentec>
>
>
>
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|