The first thing I would do as a owner of similar (Corsair II with 263G VFO)
equipment is set the internal and external VFOs to different frequencies, then
determine if RA and RB are working (not RAB ) by using the reverse button on
the VFO o putting the radio into transmit momentarily. If no joy, exercise the
RA / RB switch at least 10 times, also exercise RAB switch 10 times. Exercise
the TA / TB switch 10 times, then try the reverse button on the ext. VFO and
try a momentary transmit. If that doesn't work, I'd try cleaning the pins of
the molex connector to the 263 and plugging and unplugging it a few times.
These steps should help you either clear the problem or provide more info for
determining where to look.
73 & DX,
Gary - AB9M
________________________________
From: TenTec <tentec-bounces@contesting.com> on behalf of
hmitchell3@comcast.net <hmitchell3@comcast.net>
Sent: Thursday, May 4, 2017 11:33 AM
To: tentec@contesting.com
Subject: [TenTec] 263 VFO will only transmit on receive frequency & will not
work split
I have a 263 VFO with my Corsair that works fine except it won't transmit on
the correct frequency when trying to operate split. The receive function works
well in all switch positions, just won't transmit on other than the receive
frequency. Does anyone have any suggestions on how to troubleshoot this issue?
Thanks, Harvey, K5YU
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
TenTec Info Page -
Contesting<http://lists.contesting.com/mailman/listinfo/tentec>
lists.contesting.com
Welcome to the Ten-Tec mailing list! This list is intended for the exchange of
information on Ten-Tec-related topics ONLY. Off Topic subject postings should
be ...
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|