In addition to the sound card cable to the radio you will need an RS-232
to USB converter in order for the program to communicate with the
radio. Be sure the RS-232 to USB converter uses the FTDI chip set and
NOT the Prolific chip set. That connects between the DB-9 connector on
the back of the radio to a USB port on the computer.
The sound card only handles audio to / from the radio / computer.
73
Bob, K4TAX
On 5/5/2018 12:56 PM, Michael Chowning wrote:
I am having difficulty connecting to the software program, Ham Radio Deluxe. When I attempt to
“connect”, an error message comes up saying “can not find the file specified. Make
sure your radio is switched on and not in memory mode.” The Radio is a Ten Tec Omni VII. I have
tried all the com ports and speeds and auto-detect. I have the Soundcard input and output specified as USB
Audio Codec. Any help would be appreciated! The computer is a NanoPC running Window 10 Pro.
Mike, N8TTR
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|