This one was new old stock from AD0S... it is an export model that I bought
from him the year TT brought out their first updated model of the 425 at
Dayton. So it is an early version.
________________________________
From: TenTec <tentec-bounces@contesting.com> on behalf of Jim Brown
<k9yc@audiosystemsgroup.com>
Sent: Tuesday, April 23, 2019 10:04 PM
To: tentec@contesting.com
Subject: Re: [TenTec] TenTec Titan Meter Lamps
I have three Titans, and meter lamps is something they did differently
over the years. At one point they used 28V lamps, at others 12V in
series. They are undoubtedly labeled, so look at them when you open it up.
FWIW, I replaced all my incandescent meter lamps with low current,
higher voltage to improve life.
73, Jim K9YC
On 4/23/2019 5:55 PM, GARY HUBER wrote:
> The lamps just failed (04/20/19)… both failed so they must be in series, if
> the circuit is 28 VDC and the lamps are 2 X 12 VDC.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|