I would take the time and clean connectors. Do them one at a time. Be careful
and assure they are seated correctly. I use contact cleaner applied to a Q-Tip
and scrub the male pins. Then exercise the connector on and off of the mating
connector to wipe the contacts. NEVER spray anything into the radio.
Bob, K4TAX
Sent from my iPhone
> On Apr 2, 2020, at 12:20 PM, Byron Cordes via TenTec <tentec@contesting.com>
> wrote:
>
>
> Hello
> Having a problem with a Orion I no ptt from Mike plug. Ok no big deal use
> ptt in back of radio it has worked for 6 weeks that way. Now no ptt on back
> of radio or front . Vox has worked at all times.
> Did ram and master reset no good. Anyone been down this road before ? I’ll
> probably look at vox first and see where it switches at and go from there.
> Any ideas?
> Thanks 73s Byron AC9PA
> Sent from my iPad
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|