Excellent idea! I'll try that!
73,
Kim N5OP
On 9/23/2021 5:11 PM, Bernie Skoch via TenTec wrote:
Kim,
I've had it happen when I have used a mediocre adapter to take my 1/8" phones plug
and adapt it to the 1/4" jack.
Have you reversed the sources to see if the problem follows the source or the
jack? (I _think_ you can do that...)
Best of luck troubleshooting.
Bernie K5XS
-----Original Message-----
From: Kim Elmore <cw_de_n5op@sbcglobal.net>
To: tentec@contesting.com
Sent: Thu, Sep 23, 2021 5:02 pm
Subject: [TenTec] Right Channel dead on Orion 2 phones
Has anyone seen this happen before? The right channel on the stereo
phone output jaclk appears to be dead. Not a sound on the right side.
Yet, on speaker I hear what should come put of the right channel without
a problem. So, there appears to be audio from the source I'm routing to
the right channel (the RX-366 audio). I've done a couple of master
resets to no avail, though I will add that initially today the RX-366
seemed dead but after a rest, it's happy again.
Kim N5OP
--
Kim Elmore, Ph
Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, CCM, PP
SEL/MEL/Glider, UAS, N5OP, 2nd Class Radiotelegraph, GROL)
/“I occasionally play works by contemporary composers and for two
reasons. First to discourage the composer from writing any more and
secondly to remind myself how much I appreciate Beethoven." – Jascha
Heifetz/
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|