I've been "out of the loop" for quite a while, but I was involved with this
years ago. I believe you have the encoder part number correct:
https://www.mouser.com/ProductDetail/652-PEC11L4225FS0015
This was the original A9 capacitor replacement kit:
qty 2: https://www.mouser.com/ProductDetail/667-EEU-FR1H101B
qty 3: https://www.mouser.com/ProductDetail/647-UTT1H100MDD - no longer
stocked
qty 3: https://www.mouser.com/ProductDetail/667-EEU-FR1J471B
qty 1: https://www.mouser.com/ProductDetail/667-EEU-FR1E101 - no longer
stocked
73,
Barry N1EU
On Mon, Jan 23, 2023 at 11:29 AM Bob, W3IDT <w3idt@comcast.net> wrote:
> Mouser Electronics had (or used to have) an Orion II upgrade kit.
> It included caps for the A9 power board, the battery, and a bunch of
> encoders. Can't find a single part number now for the package.
>
> But the encoders are p/n 652-PEC11L 4225FS0015 as best I can read the
> small print.
>
> The caps were used by K2KP to update my A9 board, though I seem to have
> some leftover as well. I have not used the encoders, though my RIT/XIT
> encoder doesn't work.
>
> Bob, w3idt
>
> .......
> . Robert F. Teitel, W3IDT
> .
> . w3idt@comcast.net
> . w3idt@arrl.net
> ........
>
> On 1/22/2023 7:01 PM, dukeshifi wrote:
> > OK Ralph.
> >
> > Still, it’s always good to hear from you.
> >
> > 73
> >
> > Gary
> >
> >> On Jan 22, 2023, at 6:00 PM, Ralph Covington <
> ralph.covington@hotmail.com> wrote:
> >>
> >> Thanks Gary, but I’ll pass this time. Sorry to have taken up your time.
> My Orion II and Herc II are fb now. I’m 85 and I think they’ll be okay
> until I make the long trip.
> >> vy 73, de Ralph in Reno. 🖖. …_._
> >>
> >> Get Outlook for iOS<https://aka.ms/o0ukef>
> >> ________________________________
> >> From: TenTec <tentec-bounces+ralph.covington=hotmail.com@contesting.com
> <mailto:tentec-bounces+ralph.covington=hotmail.com@contesting.com>> on
> behalf of dukeshifi <dukeshifi@comcast.net <mailto:dukeshifi@comcast.net>>
> >> Sent: Sunday, January 22, 2023 2:31:05 PM
> >> To: Discussion of Ten-Tec Equipment <tentec@contesting.com <mailto:
> tentec@contesting.com>>
> >> Subject: Re: [TenTec] orion 2
> >>
> >> There is a guy on eBay selling some he claims are original. They ar en
> to but they look to be correct other than the wrong color and brand.
> >>
> >> I have some Bournes encoders that are new. I modify them because they
> come with detents, which you do to want. It takes 5 to 10 minutes each for
> me to do each so I need to get $15 each for them.
> >>
> >> Once you go to the work to remove the encoder board, you might as well
> replace all of the encoders because it is a lot of work to get this board
> out. Also, you need a really good solder puller to get the old ones off the
> board. I generally cut the leads off the old encoders and remove each lead
> one-at-a-time, then clear the holes with the solder puller. Do NOT tug very
> hard on the pins, make sure the solder is fully melted or you will pull
> traces off the board and these are almost impossible to repair.
> >>
> >> Let me know if you want mine or go searching for the ones on eBay.
> >>
> >> 73
> >>
> >> Gary
> >>
> >> W0DVN
> >>
> >>> On Jan 22, 2023, at 3:31 PM, Peter <prheide@wxs.nl> wrote:
> >>>
> >>> I need some encoders (multi, cut /pbt/bw, main af , sub af , rit/zit)
> for my TT orion 2.Does anybody know the brand or type and where to get them
> ?
> >>> Not all of them are broke, but some spare ........
> >>>
> >>> best regards Peter PD0FGQ
> >>>
> >>> --
> >>> Disclaimer
> >>>
> >>> De informatie in dit e-mailbericht, inclusief eventuele
> >>> meegezonden bestanden,is uitsluitend bestemd voor de geadresseerde.
> >>> Openbaarmaking aan derden, in welke vorm dan ook, is alleen toegestaan
> >>> na toestemming van P.R.van der Heide.
> >>> Ontvangt u dit bericht maar bent u niet de geadresseerde
> >>> van deze e-mail, dan dient u het bericht definitief te verwijderen
> >>> uit uw systeem en bestanden. P.R. van der Heide aanvaardt geen
> >>> aansprakelijkheid voor schade, van welke aard ook, die verband houdt
> >>> met risico’s verbonden aan het elektronisch verzenden van berichten.
> >>> P.R.van der Heide/First Media Products/Certified Pro Audio Engineer
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> TenTec mailing list
> >>> TenTec@contesting.com
> >>>
> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Ftentec&data=05%7C01%7C%7Cc9747cd9af2840d4992308dafcc8d20e%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638100236702920294%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=HBy1tUE6CpalEatPv6nTYTeXAdTJIQP1wAVfHJwE4C8%3D&reserved=0
> >>
> >> _______________________________________________
> >> TenTec mailing list
> >> TenTec@contesting.com <mailto:TenTec@contesting.com>
> >>
> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Ftentec&data=05%7C01%7C%7Cc9747cd9af2840d4992308dafcc8d20e%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638100236702920294%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=HBy1tUE6CpalEatPv6nTYTeXAdTJIQP1wAVfHJwE4C8%3D&reserved=0
> >> _______________________________________________
> >> TenTec mailing list
> >> TenTec@contesting.com <mailto:TenTec@contesting.com>
> >> http://lists.contesting.com/mailman/listinfo/tentec
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|