Hello All
My experience with pennants agrees with Tom's comments re metallic
supports. I always used alum poles (Mil Surplus stuff) and thot mine
worked okay. I did keep my pennant wire abt 2 feet from the support.
73 George W8UVZ
Tom Rauch wrote:
>
> > The QST article recommends using non-metallic support poles for flags
> > and pennants. The 16 ft. high vertical section six feet off the
> > ground calls for a 20 ft. mast.
> >
> > I'd be interested to know what some of the folks who have successfuly
> > built these antennas have used for masts (not including trees).
>
> Hi Don,
>
> The impedance of the antenna is fairly low. A metallic mast won't
> make any difference as long as it is more than a fraction of an inch
> from the wire.
>
> 73, Tom W8JI
> W8JI@contesting.com
>
> _______________________________________________
> Topband mailing list
> Topband@contesting.com
> http://lists.contesting.com/mailman/listinfo/topband
|