Topband
[Top] [All Lists]

Topband: Beverage Transformers

To: <topband@contesting.com>
Subject: Topband: Beverage Transformers
From: Thomas Giella, KN4LF" <kn4lf@arrl.net (Thomas Giella, KN4LF)
Date: Mon, 15 Jul 2002 10:01:15 -0400
I have used both the conventional multiple filar winding transformers as
covered in ON4UN's book and the isolation transformers too. I have
personally found the best performance as far as reduced noise transfer and
common mode to be with the isolation transformer, where the primary and
secondary windings are wound on opposing sides of the ferrite core. I also
found that using a large ferrite core as in a 2.4" O.D.

      FT-240-43  2.400 inch  1.400 inch  0.500 inch  43  850


works better then the smaller ferrite cores such as a 1.4" O.D. as far as
isolation.

       FT-140-43  1.400 inch  0.900 inch  0.500 inch  43  850


or the 0.5" O.D. cores.

      FT-50-43  0.500 inch  0.281 inch  0.188 inch  43  850






73,
Thomas Giella, KN4LF
Plant City, FL

KN4LF 160 Meter Amateur Radio Resources:
http://www.kn4lf.com


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
To: <topband@contesting.com>
Version: 6.0.375 / Virus Database: 210 - Release Date: 7/10/2002


<Prev in Thread] Current Thread [Next in Thread>
  • Topband: Beverage Transformers, <kn4lf@arrl.net (Thomas Giella, KN4LF) <=