| To: | topband@contesting.com |
|---|---|
| Subject: | Re: Topband: Adding radials, a question |
| From: | Terry Conboy <n6ry@arrl.net> |
| Date: | Thu, 02 Sep 2004 16:27:16 -0700 |
| List-post: | <mailto:topband@contesting.com> |
At 05:14 PM 2004-09-01, W5UN wrote:
I have a question for any of you who have experience with adding radials and making measurements of the changing impedance on a 1/4 wl ground plane. Another view is contained in the Dayton 2004 talk given by Rudy, N6LF. See figures 21 & 22 and the associated text in http://www.kkn.net/dayton2004/HF_vertical_ground_system_design_N6LF_Dayton.pdf Depending on radial length, the total feedpoint resistance can be above or below 36 ohms, even with 128 radials. Terry N6RY _______________________________________________ Topband mailing list Topband@contesting.com http://lists.contesting.com/mailman/listinfo/topband |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Topband: Adding radials, a question, Tom Rauch |
|---|---|
| Next by Date: | Re: Topband: Adding radials, a question, Richard Detweiler |
| Previous by Thread: | Re: Topband: Adding radials, RESOLVED, W5UN |
| Next by Thread: | RE: Topband: Adding radials, a question, Richard Detweiler |
| Indexes: | [Date] [Thread] [Top] [All Lists] |