Topband
[Top] [All Lists]

Re: Topband: Stand-off insulators for use w/ receive antennas

To: "Mike Bragassa" <bragassa@consolidated.net>,<topband@contesting.com>
Subject: Re: Topband: Stand-off insulators for use w/ receive antennas
From: ersmar@comcast.net
Date: Tue, 21 Sep 2004 15:09:59 +0000
List-post: <mailto:topband@contesting.com>
Mike:
I got a pair from The Wireman (check Google, etc) for use with my single point 
ground panel.  Mine are about two inches tall and maybe inch and a half 
diameter.  Cost was a couple of bux each, as I recall.  

73 de
Gene Smar  AD3F

-------------- Original message -------------- 

> Where can I locate those old (?) stand-off insulators used in exterior 
> antenna 
> tuning/matching boxes, etc? Only need a handful of them. Substitute? 
> 
> Hate to use those "Banana-plug binding posts" from Radio Shack even though 
> there 
> will not be any power; just receive only. 
> 
> Thanks for any help, 
> 
> Mike Bragassa, K5UO 
> _______________________________________________ 
> Topband mailing list 
> Topband@contesting.com 
> http://lists.contesting.com/mailman/listinfo/topband 
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband

<Prev in Thread] Current Thread [Next in Thread>