I use a Mac G4 in the shack and run close to the legal limit on 160. I
occasionally had a problem where the RF level caused the computer to
display a "shut down and restart" message. That was cured by powering
the computer from a separate AC circuit.
I now notice that when I TX only on 1824.6 +/- 100Hz, the monitor's
display touch button glows and the display control panel appears.
Operationally, it's nothing more than a nuisance.
Anyone one have any insight?
73, Steve WB6RSE
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|