Topband: Tower coupling into antenna

["D Andersen" <w7dddd@msn.com>]

Re; AA2MF

You can model the tower including all antennas on the tower and with the 
inverted L in the model using EZNEC.  Change all of the sources to zero 
amplitude except the inverted L.  You then can look at the currents in the 
tower and see the results.  I would include a 20 ohm(or so) load at the base 
of the tower to ground.

Don Andersen, w7dd 
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband