Topband
[Top] [All Lists]

Re: Topband: how to set up a Skype receiving beacon

To: "Tom Rauch" <w8ji@contesting.com>, <raoulc@smmcape.co.za>,<topband@contesting.com>
Subject: Re: Topband: how to set up a Skype receiving beacon
From: "PA5MW" <pa5mw@home.nl>
Date: Thu, 9 Mar 2006 22:12:33 +0100
List-post: <mailto:topband@contesting.com>
> Second, people will ping that receiver. The mere presence of
> the receiver, if people use it, will create unnecessary QRM
> by encouraging people to make one-way transmissions to that
> receiver. This is something that should never be encouraged.


Not presenting an opinion here, but a mere fact:
Skype does not provide multicasting at automatic answering.
In other words; only 1 listener can automatically connect the RX experiment 
of K3NA at a time. As such, in practise the amount of "pingers" is limited 
to 1. And it takes a while before you have the remote RX audio online. Next 
there will be a latency of min 1 sec.


On a personal note:
I can see the picture Tom is drawing. It is certainly not unrealistic and 
not welcome in my view.
To "test" your low-band performance you can do 2 other things:
- make qso's
- enter a dedicated chat session, like www.on4kst.com , telnet converse  for 
making your sked etc..etc..

73 Mark, PA5MW 


_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband

<Prev in Thread] Current Thread [Next in Thread>