> Tom,
>
> I think you missed the point of my post. The end result desired is to
> determine how effective the added radials are.
>
> My method involves relative measurements. In this case we are comparing X
> number of radials versus Y number of radials. As one adds radials
> on a ground
> mounted vertical, the feedpoint impedance will decrease as the
> ground losses are
> lowered. So, one adds radials and measures the feedpoint
> impedance. When the
> impedance stops decreasing it is time to stop adding radials.
> Dave WX7G
Dave, I have measured field strength of antennas and found cases where it
does not correlate with feedpoint impedance. Both the impedance
measurement and the field strength measurement were done very
carefully.
Rick N6RK
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|