> Tom Rauch wrote:
> If you want to know FS change you really have to measure
> the FS.
>
> 73 Tom
>
Hi,
I dont think Tom is right on this one. You can not measure
field-strength, even if your meter is calibrated in FS. You
can only measure voltage or power and calculate field
strength, which is a function of measuring antenna and
frequency. Moreover the FS is undefined at zero elevation
unless there is a perfect ground between your measuring
antenna and the transmit antenna.
73 and good FS measuring.....
Thomas, DJ5DT
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|