On 28th March, Mike wrote...
> "...it seems that I read in ON4UN a rather ominous recommendation that
foam dielectric be avoided for use as phasing lines, the reason being that
the VF does not remain constant with time & temperature. He recommended
using only solid dielectric coax for that purpose. I know this isn't what
you wanted to hear, but it may save you a lot of grief down the road. I
will try to find the exact paragraph in the latest ON4UN book."
*************************
Hi Mike,
Well, that's certainly not anything that *I* particularly wanted to hear at
this end, that's for sure! Hi Hi.
I used foam satellite TV cable ("RG-6") here exclusively late last summer
for all of the phasing lines in my transmitting triangular array --- with
the amount of cable that I required, my deciding upon its use was a
"no-brainer" on account of its price advantage to me (Home Depot Canada
sells 500' spools of the stuff for less than CDN $49.00!).
Please let me know when you might locate that reference in John's
publication --- up until now, about the only warning against the use of such
cable that I was aware of was to NOT coil it too tightly, to guard against
the possibilty of the center conductor "migrating" through the foam, &
contacting the outer shield...
BTW, I have all of the editions of his book (save for the second to
last)...I even have his earliest stab at literary notoriety, i,e, "80-Meter
DX'ing", and a wonderful book that is. I believe that particular one was
published by the folks at the old "Ham Radio" magazine...
~73~ Eddy VE3CUI - VE3XZ
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|