So all the Boring guys are going to multi-element verticals on
TopBand. To try to keep up, I will erect another vertical wire over
the top of a tall fir tree with a slug of radials under it-just like its
brother 189' away. The ground slopes NorthEast at about 15-20 degrees
from level. The "soil" in the area is mostly rocks and decayed dirt from
the forest flora that's been here for eons so I'll have at least 60 1/4
wave or longer radials on the ground under the 1/4 wave vertical. I'm
on top of a ridge that slopes pretty rapidly 800' down to the valley
floor. During TopBand season the ground gets pretty wet as the QTH is in
Oregon. The radiator will be vertical, as a tree supports it, but the
radials will be on the ground and sloping toward EU.
The question: will the slope of the real ground and radials under
the vertical have any impact on the takeoff angle as compared to what
might be expected from a level ground?
This grand experiment will be put into play sometime next month but
don't really know what to expect.
Would appreciate any thoughts or comments.
73 and I remain,
Lew W7EW/W7AT
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|