Topband
[Top] [All Lists]

Re: [TowerTalk] Topband: soldering radials

To: <cx6vm.jorge@gmail.com>, <towertalk@contesting.com>, Topband <topband@contesting.com>
Subject: Re: [TowerTalk] Topband: soldering radials
From: Charles Moizeau <w2sh@msn.com>
Date: Tue, 16 Aug 2011 22:00:10 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Jorge,

It has been my experience at this QTH in NJ that soldered connections outdoors 
do not do well with solder that contains lead.  Over time the connections all 
turn dull and often the solder on a well-soldered joint will crumble over time.

For this reason all my outdoor soldered connections are made with a solder that 
is 96 percent tin and 4 percent silver.  It is readily available in the US at 
Radio Shack stores.  

In your case, you might see if jewelry makers or stores that repair jewelry 
have this kind of solder.

I use a DXE radial plate and the ring-shaped connector lugs are soldered as I 
have described, and it is a very satisfactory arrangement.  

73,

Charles, W2SH

> From: cx6vm.jorge@gmail.com
> To: towertalk@contesting.com; topband@contesting.com
> Date: Mon, 15 Aug 2011 21:12:44 -0300
> Subject: Topband: soldering radials
> 
> Hello,
> 
>  
> 
> a friend told me to not solder radials to the vertical ring/plate and
> between them if I am installing an array, like a 4 square. That´s because
> can catch some noise.
> 
>  
> 
> That´s true?
> 
>  
> 
> If yes, how can I solder them? Also if I use a DXE plate to atacch the
> radials, I need to solder the wire to terminals, so what type of solder may
> I use?
> 
>  
> 
> Do you have a type/model (or ebay link) to see what to use?
> 
>  
> 
> Thanks,
> 
> Jorge
> 
> CX6VM/CW5W
> 
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK
                                          
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>