Topband
[Top] [All Lists]

Re: Topband: soldering radials

To: topband@contesting.com
Subject: Re: Topband: soldering radials
From: Herb Schoenbohm <herbs@vitelcom.net>
Reply-to: herbs@vitelcom.net
Date: Thu, 18 Aug 2011 12:39:16 -0400
List-post: <topband@contesting.com">mailto:topband@contesting.com>

On 8/18/2011 9:13 AM, Jorge Diez - CX6VM wrote:
> Just was thinking, is the same or better to have 120 radials of AWG18 than
> 40 radials of AWG8? What´s the idea? This is the same amount of copper, but
> the distribution over the ground is different.
>
>
>
>
> The size of the wire is not as much of an issue as the number of 
> radials.  If solid copper wire is buried in the ground the issue is 
> survivebility in various types of soil conditions.  If you can lay out 
> 120 radials on the grass and tack them down with staples, even if you 
> use less expensive THNN house wire, you will find that, even at 60 
> radials, is about as good as it gets for a budgetary ground system.  
> Adding 60 more will not be a perceptible increase to those you work, IMHO

Herb Schoenbohm, KV4FZ
>
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK

<Prev in Thread] Current Thread [Next in Thread>