VE2TZT wrote:
> Additionally the primary of the splitter transformer is symmetric and
> isolated from the
> secondary so, it seems that this splitter can at the same time provide common
> mode isolation.
Capacitance from primary to secondary will degrade common mode isolation
on higher frequencies. Depending on your needs, it may still be sufficient.
The splitting and matching function is fine.
The nominal value of the resistor is 25 Ohm.
For 75 Ohm to 2 x 50 Ohm transformation
the turns ratio should be (1 + 1) : 1.732.
73,
Sinisa YT1NT, VE3EA
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|