An actual pic of this transformer would be worth a thousand words. The
drawings are great but I'd love to see this thing wound and connected for
real. I don't have any experience with such things so having a pic to show
details of how it works when drawings meet reality is priceless.
Thanks for all this, pretty interesting.
On Thu, Dec 8, 2011 at 7:21 PM, W0UCE <w0uce@nc.rr.com> wrote:
> New information, details and drawings for the K2AV 160m Folded Counterpoise
> (FCP) System, Isolation Transformer and Installation Notes have been posted
> on my website.
>
>
>
> http://www.w0uce.net/K2AVantennas.html
>
>
>
> If you are interested in building an FCP versus putting in a dense radial
> field heed the following advise:
>
> * The ONLY means of achieving the required degree of Isolation is to
> use the Isolation Transformer as specified by K2AV
> * Tests using 1:1 Baluns and Line Isolators have ALL FAILED - you
> waste RF Power, Time and Money unless the specified xfmr is installed
> * DO NOT attempt to use Insulated Window Line for the FCP - We
> already
> tried it and it does not work - too lossy
> * Use #12 Bare wire for the FCP elements - Moisture gathers on
> insulated wire and detunes the FCP
> * Use 4" spacing between FCP elements
> * Small diameter PVC Pipe Spreaders work well - use caps on both ends
> and put a small weep hole in the bottom cap
> * It is best to install the FCP in a straight line the overall length
> is 66' if bends are necessary make them near the ends of the elements
>
>
>
> 73,
>
> Jack W0UCE
>
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK
>
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|