Topband
[Top] [All Lists]

Topband: New HOWTO on Monitoring CAT Commands

To: topband@contesting.com
Subject: Topband: New HOWTO on Monitoring CAT Commands
From: Ian Wade G3NRW <g3nrw-radio@ntlworld.com>
Date: Thu, 16 Feb 2012 21:19:07 +0000
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Recently, while writing Excel VBA code for tools to manage the Kenwood 
TS-590S, I found the need to monitor the CAT commands issued by my 
software to the radio, and to check the responses from the radio.

I have now documented the procedures, in "How To Monitor Kenwood TS-590S 
CAT Commands". Following these procedures, you can monitor the CAT 
traffic between well-known applications (such as HRD, Fldigi, etc) and 
the radio, and also generate your own CAT commands using PuTTY.

Two other very useful utilities are briefly described: USBDeview and 
Portmon.

Although written primarily with the TS-590S in mind, the procedures are 
in fact usable with almost any radio that supports CAT commands.

To download the HOWTO, go to the TS-590S Resources Page:

    http://homepage.ntlworld.com/wadei/ts-590s.htm

Scroll down to the "HOWTOs" section, then click on the link:

"HOWTO monitor TS-590S CAT commands".

This is the first version of the HOWTO. If you have any feedback, or 
find any errors or misleading statements, please let me know.


-- 
73
Ian, G3NRW

The TS-590S Resources Page:
   http://homepage.ntlworld.com/wadei/ts-590s.htm

































_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK

<Prev in Thread] Current Thread [Next in Thread>
  • Topband: New HOWTO on Monitoring CAT Commands, Ian Wade G3NRW <=