Topband
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: Topband: Radial wire

from [Jim Brown] [Permanent Link][Original]
To: topband@contesting.com
Subject: Re: Topband: Radial wire
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
Date: Tue, 05 Jun 2012 10:07:28 -0700
List-post: <topband@contesting.com">mailto:topband@contesting.com> 
On 6/5/2012 9:57 AM, jcjacobsen@q.com wrote:
> Another source, again if you watch for sales, is 14-2 awg w/ground NM Romex 
> type cable.

Yes. I just did that with a 25 ft piece of #10-2 Romex to build some 
loading coils.  The big box store didn't have any #10 solid.

73, Jim K9YC
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: Topband: Radial wire, jcjacobsen
Next by Date:  Re: Topband: radial wire source, Pete Smith N4ZR
Previous by Thread:  Re: Topband: Radial wire, jcjacobsen
Indexes:  [Date] [Thread] [Top] [All Lists]