To: | n8dcj@yahoo.com |
---|---|
Subject: | Re: Topband: Radial wire |
From: | jcjacobsen@q.com |
Date: | Tue, 5 Jun 2012 12:57:04 -0400 (EDT) |
List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
Dan is looking for radial wire................. I've been lucky to find spools on sale at the local Big Box stores. Another source, again if you watch for sales, is 14-2 awg w/ground NM Romex type cable. Run an inexpensive Romex splitter over it and you have 750 feet of radials from a 250 foot coil. It's a little work, but it's going in the ground........... PLUS 1/3 of the radials are bare copper. Good luck with the project. 73 es GDDX K9WN Jake _______________________________________________ UR RST IS ... ... ..9 QSB QSB - hw? BK |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Topband: radial wire source, Eric Tichansky NO3M |
---|---|
Next by Date: | Re: Topband: Radial wire, Jim Brown |
Previous by Thread: | Topband: radial wire source, Dan Bookwalter |
Next by Thread: | Re: Topband: Radial wire, Jim Brown |
Indexes: | [Date] [Thread] [Top] [All Lists] |