To: | <Topband@contesting.com> |
---|---|
Subject: | Re: Topband: Reducing Noise in the Shack |
From: | "Tom W8JI" <w8ji@w8ji.com> |
Reply-to: | Tom W8JI <w8ji@w8ji.com> |
Date: | Thu, 21 Jun 2012 16:01:09 -0400 |
List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
White papers: http://docs.commscope.com/Public/Coax101.pdf Although the test frequency and method is not described, this shows the difference between Quad shield and single foil and braid is 7 dB before 10,000 flexes and 13 dB after 10,000 flexes. My measurements of F11 are at: http://www.w8ji.com/coaxial_cable_leakage.htm Those measurements were made in 2007, and repeated in 2011 with no definate change in results. That cable has crimped connectors. Another white paper, which bears out measurements: http://www.westpenn-wpw.com/pdfs/coax_construction.pdf 73 Tom _______________________________________________ UR RST IS ... ... ..9 QSB QSB - hw? BK |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Topband: Reducing Noise in the Shack, John Harden, D.M.D. |
---|---|
Next by Date: | Re: Topband: Reducing Noise in the Shack, DAVID CUTHBERT |
Previous by Thread: | Re: Topband: Reducing Noise in the Shack, Tom W8JI |
Next by Thread: | Re: Topband: Reducing Noise in the Shack, ZR |
Indexes: | [Date] [Thread] [Top] [All Lists] |