Topband
[Top] [All Lists]

Re: Topband: Beverage strain

To: "Bruce" <k1fz@myfairpoint.net>, <topband@contesting.com>
Subject: Re: Topband: Beverage strain
From: "ZR" <zr@jeremy.mv.com>
Date: Sun, 22 Jul 2012 10:32:57 -0400
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Thats fine for single wire installs, making and installing spacers for a 2 
wire is a pain and likely far from a perfect balance.

Carl
KM1H


----- Original Message ----- 
From: "Bruce" <k1fz@myfairpoint.net>
To: <topband@contesting.com>
Sent: Sunday, July 22, 2012 11:55 AM
Subject: Topband: Beverage strain


>
> It's almost enough to drive one back to electric fence wire. It's
> inexpensive and reconnects easily using the wireman splice.
> 73
> Bruce-K1FZ
>
> On 07/20/2012 12:59 PM, Tom W8JI wrote:
> This is exactly the problem I have with Wireman stranded ~400 ohm ladder
> line. After a few years, if water gets inside, conductors  rust through.
>
> If water gets into WD1A, the three steel strands rust through in
> less than 6 months. Sometimes much less. The four tinned copper
> strands deteriorate and eventually break also. I'm not a
> metallurgist, but somehow the rust from the steel *seems* to weaken
> them.
>
>
> 73,
> Paul N1BUG
>> _______________________________________________
>> UR RST IS ... ... ..9 QSB QSB - hw? BK
>>
>
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1424 / Virus Database: 2437/5147 - Release Date: 07/22/12
> 

_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK

<Prev in Thread] Current Thread [Next in Thread>