I will let all know, Bob - plan to erect it in about two weeks, in preparation
for the Pre-Stew and the ARRL 160 contest (I'll be on travel the month of
December so will miss out on the Big Stew) and I'll "report out" as soon as I
have some observations to pass on!
72, Jim R. K9JWV
> From: k6uj@pacbell.net
> Date: Tue, 2 Oct 2012 18:41:28 -0700
> To: topband@contesting.com
> Subject: Re: Topband: K6STI low noise receive loop
>
> If you try the K6STI low noise loop please let us know your results. I have
> tried a number of low noise receiving loops, currently
> am playing with a Waller flag. The K6STI loop is very interesting, I may try
> it myself also.
>
> 73,
> Bob
> K6UJ
>
>
>
> On Oct 2, 2012, at 11:52 AM, Tom W8JI wrote:
>
> > Well, there is no "modeling" associated with this effort, Tom - they just
> > "did it".....built it, tuned it and used it! I've attached the article for
> > perusal, if interested....Jim R.
> >>>
> >
> > I saw the original article. This one uses an isolated primary secondary
> > coupling system.
> >
> > Try it and see if it works reliably in your installation. I think with a
> > good layout and feedline routing you should be OK with this method.
> > _______________________________________________
> > UR RST IS ... ... ..9 QSB QSB - hw? BK
>
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|