To: | "Charlie Cunningham" <charlie-cunningham@nc.rr.com> |
---|---|
Subject: | Re: Topband: raised radials |
From: | "Carl" <km1h@jeremy.mv.com> |
Date: | Sat, 15 Dec 2012 21:23:23 -0500 |
List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
You ever wonder why a few on here are so much louder than their competition
with similar installations when 1-2 keep trying to make us believe it has
nothing to do with the radials beyond a small number? IF he is correct then
why the big difference? Anybody care to offer a guess?
Or the fellow on a city lot that knows he is 10dB below the guy a mile away out in the country with a big vertical or T with lots of long radials plus a base mesh....after several years of comparisons. You dont need fancy test equipment to see that. Ever wonder why photos of elevated radial BC antennas show a base mesh and a small number of radials? And then performance tests require a reduction in power to conform to the canned 120 radials in the ground benchmark signal strength. Or due to the stations original certification with a full set of base radials that rotted away and the elevated are the replacements. Or the person on here who went from an extensive radial system to a full screen claimed a 5dB improvement but now denys the possibility. Its in the TB archives from 1998. A few seem to be in a continuous rut with impedance the only factor they seem to mention. There is a lot more than just the immediate soil under the radials that is involved when it comes to field strength many wavelengths or continents away which also affects the energy in a particular elevation angle. Carl KM1H----- Original Message ----- From: "Charlie Cunningham" <charlie-> Hee! :- ) -----Original Message-----From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of Tom W8JISent: Saturday, December 15, 2012 7:12 PM To: DAVID CUTHBERT; Carl Cc: David Michael Gaytko // WD4KPD; topband@contesting.com Subject: Re: Topband: raised radialsThat is quite an improvement. I had to have dropped the base impedance from 400 ohms to 40 ohms for it to do that.Things are often magic when we rely on feelings or emotions to measure decibels. _______________________________________________ Topband reflector - topband@contesting.com ----- No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1430 / Virus Database: 2634/5462 - Release Date: 12/15/12 _______________________________________________ Topband reflector - topband@contesting.com |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Topband: GAP Vertical Question, Carl |
---|---|
Next by Date: | Re: Topband: GAP Vertical Question, Doug Renwick |
Previous by Thread: | Re: Topband: raised radials, Tom W8JI |
Next by Thread: | Re: Topband: raised radials, Tom W8JI |
Indexes: | [Date] [Thread] [Top] [All Lists] |