But, how would we feed it" Unless the tower has a base insulator??
Maybe a shunt feed might be possible?
Charlie, K4OTV
-----Original Message-----
From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of Mike
Armstrong
Sent: Friday, September 06, 2013 11:25 PM
To: Charlie Cunningham
Cc: ZR; <topband@contesting.com>; Shoppa, Tim
Subject: Re: Topband: Are stacked verticals feasible?
Hey...... IF the tower is tall enough for that duty (3/4 wave tall), then
you could put that "skirt" on the "middle" 1/4 wave, as it were, and you got
'er...... Could he be that lucky? I have to admit, other than right this
second, I hadn't ever considered that as a possibility. It "should" work so
long as the height is close to correct and whatever is mounted to the top,of
the tower doesn't make the structure look too,much larger than it should
look for resonance.
HMMMMMMMM
Mike AB7ZU
Kuhi no ka lima, hele no ka maka
On Sep 6, 2013, at 19:58, "Charlie Cunningham"
<charlie-cunningham@nc.rr.com> wrote:
> Hi, Mike
>
> I remember the guy that you are referring to, but it's been so many
> years that I don't remember his last name tither. He published a book
> via either ARRL or CQ mag.
>
> A collinear 1/2 wave over a 1/4 wave GP has certainly been done and
> used commercially at VHF. The "skirt" can also be replaced with a
> shorted 1/4 wave phasing line.
>
> Well, Tom's tower is probably tall enough - but how in heck would we
> get the verticals far enough away from the tower??
>
> Charlie, K4OTV
>
> -----Original Message-----
> From: Mike Armstrong [mailto:armstrmj@aol.com]
> Sent: Friday, September 06, 2013 10:42 PM
> To: Charlie Cunningham
> Cc: ZR; Shoppa, Tim; <topband@contesting.com>
> Subject: Re: Topband: Are stacked verticals feasible?
>
> Carl and Charlie,
> I am not sure it would even be close to practical or even doable, but
> I remember seeing an old book on verticals written by a prior Navy
> Captain, I believe. He had a very interesting design for what WE
> would, today, call a collinear that was 3/4 wave length tall on 20
> meters..... it was, in reality what looked like half of a double-zepp
> antenna in a vertical orientation. It intrigued me that it was like a
> half wave stacked on top of a 1/4 wave worked against ground (normal
> radial field). The interesting part was how he used a "skirt" around
> the "middle" quarter wavelength portion to produce the the in-phase
relationship with the physically lower 1/4 wave.
>
> You guys may already know the design I am talking about. I saw that
> book a long time ago, like back in the late 60's I think..... maybe
> early 70's. I was considering trying to find the article or book whenI
> was looking for a better vertical for my winlink node on 20
> meters..... the one I have been talking about. However, I tried the
> 5/8ths first because I knew how to build one without having to possess
> any special instructions. It was so successful, that I completely
> forgot about the "collinear." On the other hand, this discussion
> reminded me of that book and how author "raved", a little anyway, over
> its performance. I remember that the height of the finished antenna
> for 20 meters was something very close to 50 feet...... and that is
> not much taller than a 5/8ths..... maybe 7 or 8 feet taller. So on
> 20 it is very doable and, supposedly, it has some reasonable gain for
> the effort. I would like to find the book because it described a good
> way to make that all-important skirt that got the phase correct
> between the upper half-wave and the lower quarter-wave sections. Due
> to its relatively tall structure, it probably wouldn't even be "possible"
to build one for 160.....
> at least not by most of us. It would be interesting to see if it has
> the same "problem" that Tom was referring to for the 5/8ths..... "too low"
> radiation angle. I know it isn't supposed to have that secondary lobe
> that a 5/8ths has...... So maybe it would be an improvement ..... IF
> it was even possible to build one. That would be one tall structure on
160.... LOL LOL.
> Still, for someone needing an omni antenna with some gain on the
> higher HF bands, it might be a decent answer. Never built one, so I
> really don't know if it really works or not. Although, as I said,
> that author was a Navy Captain whose job was designing some of the
> shipboard antenna systems, like the NORD and some other odd ducks....
> Well, "odd" to those who don't have to build low loss, low band
> antennas on a floating "postage stamp." I know, I know, you might
> have trouble thinking of something the size of an Aircraft Carrier
> being referred to as a floating postage stamp, but if you have spent
> any time at sea on a "big deck," you know exactly what I mean by that
> statement...... he he he he. I really should remember his name, darn
> it..... with all the time I spent on ships at sea working with his
> designs, it is really sad (bad?) that I don't remember his name......
> Paul "something?" I'll find out..... lol
>
> Mike AB7ZU
>
> Kuhi no ka lima, hele no ka maka
>
> On Sep 6, 2013, at 19:03, "Charlie Cunningham"
> <charlie-cunningham@nc.rr.com> wrote:
>
>> Well, Carl
>>
>> You just proposed a total height of 3/4 wavelength, it seems. Do you
>> have that much height?
>>
>> Charlie, K4OTV
>>
>> -----Original Message-----
>> From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of ZR
>> Sent: Friday, September 06, 2013 9:26 AM
>> To: Shoppa, Tim; topband@contesting.com
>> Subject: Re: Topband: Are stacked verticals feasible?
>>
>> Look at it as 2 ground planes with the lower feed point 1/4 wave
>> above ground along with its elevated radials which should make it
>> pretty much ground independent according to what has been published
>> on here and elsewhere.
>>
>> The second ground plane would be identical with 1/4 wave spacing from
>> the top of the lower antenna or a 1/2 wave between feed points.
>>
>> Then I would think that the ground conductivity at the reflection
>> point would be the only concern as far as efficiency and gain??
>>
>> If installed as vertical dipoles then there would also have to be
> additional
>> spacing between them.
>>
>> I would think that at 6-12' spacing from the tower it would minimize
>> interaction on 160 or 80?
>>
>> Does anyone on here have EZNEC and can plot this?
>>
>> Carl
>> KM1H
>>
>>
>>
>> ----- Original Message -----
>> From: "Shoppa, Tim" <tshoppa@wmata.com>
>> To: "Carl" <km1h@jeremy.mv.com>; <topband@contesting.com>
>> Sent: Thursday, September 05, 2013 10:30 PM
>> Subject: Re: Topband: Are stacked verticals feasible?
>>
>>
>>> Isn't this a "Vertical dipole"? Two quarter wave radiating elements?
>>> And
>> tower behind it will be some kind of reflector/director depending on
> height.
>> The radials seem unimportant if thought of this way.
>>>
>>> Tim N3QE
>>> ________________________________________
>>> From: Topband [topband-bounces@contesting.com] on behalf of Carl
>> [km1h@jeremy.mv.com]
>>> Sent: Thursday, September 05, 2013 9:17 AM
>>> To: topband
>>> Subject: Topband: Are stacked verticals feasible?
>>>
>>> Assuming that sufficient tower height was available, guy wires are
>> insulated
>>> or broken up into short non-resonant sections. Tower face is 12 or 18".
>>>
>>> Start at 1/4 wave up with a 1/4 wave ground plane with radials
>>> sloping at about 45 degrees. The vertical wire is 6-12' away from the
tower face.
>>>
>>> Then a 1/4 wave (or 1/8) up install a duplicate.
>>>
>>> What does EZNEC say about this?
>>>
>>> With the different spacings?
>>>
>>> Effect of starting lower and how low before there are ground related
>>> problems?
>>>
>>> Phasing with coax or a LC network?
>>>
>>> Switching in a delay line to tilt the lobe up a bit?
>>>
>>> Curiosity got the cat!
>>>
>>> Carl
>>> KM1H
>>>
>>>
>>>
>>>
>>> _________________
>>> Topband Reflector
>>> _________________
>>> Topband Reflector
>>>
>>>
>>> -----
>>> No virus found in this message.
>>> Checked by AVG - www.avg.com
>>> Version: 10.0.1432 / Virus Database: 3222/6141 - Release Date:
>>> 09/05/13
>> _________________
>> Topband Reflector
>>
>> _________________
>> Topband Reflector
>
_________________
Topband Reflector
_________________
Topband Reflector
|