Good suggestion Ray.
When I moved to this QTH $$$$ was TIGHT... I went to the local Cable Co. and
spoke to the line Boss.
He gave me all the cable ends I wanted.... I originally feed my 4 towers with
3/4" 75 ohm Catty hardline.
Give'em a try .
Wayne W3EA
PS I also had permission to clean up there Stump Strand 1/4 EHS with most
stumps below 120' worked for me :)
as I broke my guys with insulators ,
> Date: Thu, 30 Jan 2014 11:32:12 -0700
> From: rayn6vr@cableone.net
> To: Gary@ka1j.com
> CC: topband@contesting.com
> Subject: Re: Topband: Speking of Hardline
>
> Have you tried the actual cable companies? My local Cableone cable service
> gave me a spool with about 800 ft on it. At the time, they had probably 6 -
> 8 spools with odds lengths in their yard, so giving one away was no big
> deal.
>
> Sometimes a case of beer helps make a deal!
>
> Ray,
> N6VR
> Chino Valley
>
>
> On Thu, Jan 30, 2014 at 11:25 AM, Gary Smith <Gary@ka1j.com> wrote:
>
> > I've asked the local cable installers if they have any extra hardline
> > & no cigar. I need around 400' of it so Andrews is out of the
> > question. I'd like the 50 ohm line but will probably have to settle
> > for aluminum jacketed 75 ohm line.
> >
> > Any suggestions where else I might look to find something used?
> >
> > 73,
> >
> > Gary
> > KA1J
> >
> > ---
> > This email is free from viruses and malware because avast! Antivirus
> > protection is active.
> > http://www.avast.com
> >
> > _________________
> > Topband Reflector Archives - http://www.contesting.com/_topband
> >
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|