Topband
[Top] [All Lists]

Re: Topband: Skimmer calibration

To: <topband@contesting.com>
Subject: Re: Topband: Skimmer calibration
From: "Peter Voelpel" <dj7ww@t-online.de>
Date: Tue, 19 Aug 2014 11:52:34 +0200
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Sure it is. Most skimmers are setup to receive all directions on more then
one band.

Anyway, Skimmers only show S/N.

73
Peter

-----Original Message-----
From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of Mike
Waters
Sent: Dienstag, 19. August 2014 11:34
To: topband
Subject: Re: Topband: Skimmer calibration

When I last investigated, all the skimmers and Web SDRs that were outside
of North America all had terrible receive antennas for copying DX signals
on 160. (And who knows how many of them are in quiet locations?)

When I say "terrible", I mean small "magnetic" loops, very short whips, low
dipoles, a random end-fed wire, etc. No phased arrays or Beverages, and not
even a Flag, K9AY, EWE, etc.

Does anyone know if that is still the case?

73, Mike
www.w0btu.com
_________________
Topband Reflector Archives - http://www.contesting.com/_topband

_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>