Re: Topband: BCB interference ?

["Richard (Rick) Karlquist" <richard@karlquist.com>]

On 9/22/2014 9:42 AM, Jim Brown wrote:
> On Mon,9/22/2014 7:07 AM, Hardy Landskov wrote:
> > The catch is it has to be able to handle the transmit power too.
> Not if you put the filter in the RX loop. That feature is part of the
> KXV3 and KXV3A modules
>
> 73, Jim K9YC
Does this allow me to listen on my transmit vertical through
a low power high pass filter?  AFAIK, what you are talking about
only applies a filter to the separate RX antenna.  I tried to
read about this on the Elecraft site, but it is not clear.

Rick N6RK
_________________
Topband Reflector Archives - http://www.contesting.com/_topband