Check out Chinarf on ebay, I have just bought 10 off PL259 Plugs to LDF4-50
for about $4.5 delivered. High quality product.
Do a search for UHF Plug or UHF plug to 1/2" corrugated copper. 73 Clive
GM3POI
-----Original Message-----
From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of Greg
Zenger
Sent: 03 June 2016 22:53
To: Bob K6UJ
Cc: topband
Subject: Re: Topband: UHF Male connector for 1/2" cellflex
Bob,
Take a look at RFU502-H1 from RF industries. They sell for ~$35 each new.
I don't have experience with that particular connector, but I suspect it
will work just fine with your cable.
Otherwise the RFS connectors like the ones in your link are super easy to
install. I've installed about a hundred of them over the years.
Greg, N2GZ
On Fri, Jun 3, 2016 at 6:26 PM, Bob K6UJ <k6uj@pacbell.net> wrote:
>
> I need to have a PL-259 type connector on one end of a 1/2" cellflex
> cable I am making up. I have an N connector on one end, no problem.
> I like the EZfit connectors and was hoping to find one for UHF male
> (PL-259)
>
> I can get another N connector and then get a N to PL-259 adapter but I
> would prefer to not have an adapter if possible. I did find one
> (below) its not an Andrew EZfit but looks to be about the same thing.
> Know of other options ?
>
> http://www.theantennafarm.com/catalog/rfs-734745-5804.html
>
> Bob
> K6UJ
>
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|