To: | topband@contesting.com |
---|---|
Subject: | Topband: 160 m inverted L |
From: | Art Heft <artandkaren@gmail.com> |
Date: | Mon, 7 Nov 2016 16:05:47 -0500 |
List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
I finally got the inverted L up this afternoon. Vertical dimension is 65' and the almost horizontal dimension is 95'. I am using a very carefully built FCP and the commercial transformer. My SARK 110 shows resonance at about 1.68 MHz but the resistive part is up around 1000 ohms. Taken right at the antenna. Doesn't seem right to me. Any ideas? 73, Art K8CIT Hillman MI _________________ Topband Reflector Archives - http://www.contesting.com/_topband |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Topband: Traditional or off-center fed 160m vertical design?, David Cutter |
---|---|
Next by Date: | Re: Topband: RFI, lstoskopf |
Previous by Thread: | Topband: Traditional or off-center fed 160m vertical design?, Robert Fanfant |
Next by Thread: | Re: Topband: 160 m inverted L, Guy Olinger K2AV |
Indexes: | [Date] [Thread] [Top] [All Lists] |