| To: | topband@contesting.com |
|---|---|
| Subject: | Re: Topband: transformers, teflon tubing |
| From: | "Augie \"Gus\" Hansen" <augie.hansen@comcast.net> |
| Date: | Fri, 28 Apr 2017 09:24:29 -0600 |
| List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
Minimize inter-winding capacitance. 73, Gus Hansen KB0YH On 4/28/2017 7:14 AM, P H via Topband wrote: I've noticed use of teflon tubing in a Flag family transformers. Apart from low losses: is there another reason to use teflon coated wires? Regards Piotr, SP2BPD _________________ Topband Reflector Archives - http://www.contesting.com/_topband _________________ Topband Reflector Archives - http://www.contesting.com/_topband |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Topband: transformers, teflon tubing, P H via Topband |
|---|---|
| Next by Date: | Re: Topband: transformers, teflon tubing, Tim Shoppa |
| Previous by Thread: | Topband: transformers, teflon tubing, P H via Topband |
| Next by Thread: | Re: Topband: transformers, teflon tubing, Tim Shoppa |
| Indexes: | [Date] [Thread] [Top] [All Lists] |