Hi Piotr
Yes, the WF load the tower and if you use the same tower to transmits, like
I do, the voltage can me over 10KV. Also the transformer and resistor
should stand 900 joules or 1 KW for one second, 100 for 10 seconds, you font
want to burn the phasing system, and replaced it any time you have a
thunderstorm nearby.
The logistic to get the antenna at the tower most of the time cost more
than the antenna itself, repeating the installation several times a year is
not a good idea.
Regards
JC
-----Original Message-----
From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of P H via
Topband
Sent: Friday, April 28, 2017 9:14 AM
To: topband@contesting.com
Subject: Topband: transformers, teflon tubing
I've noticed use of teflon tubing in a Flag family transformers.
Apart from low losses: is there another reason to use teflon coated wires?
Regards
Piotr, SP2BPD
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|