Topband
[Top] [All Lists]

Re: Topband: - Belden Snap n Seal

To: Mike Waters <mikewate@gmail.com>
Subject: Re: Topband: - Belden Snap n Seal
From: HP <pfizenmayer@q.com>
Date: Thu, 5 Oct 2017 18:09:01 -0400 (EDT)
List-post: <mailto:topband@contesting.com>
I bought a box of 50 Belden Snap N Seal - the box says RG-6/6QS which I assumed 
meant it was ok for both but have never used it on anything but regular RG6 - I 
have the Belden Tool which I bought at same time. - part number of the 
connector is SN51P6U-50R It was at LOWES and was much less than ordering from a 
ham supplier . I cant find my receipt but remember it beat u know who by a LOT. 
73 Hank K7HP 
_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>