Topband
[Top] [All Lists]

Re: Topband: BOG height

To: Paul Mclaren <paul.mcl@gmail.com>
Subject: Re: Topband: BOG height
From: Chuck Dietz <w5prchuck@gmail.com>
Date: Thu, 1 Aug 2019 12:23:10 -0500
List-post: <mailto:topband@contesting.com>
When I tried a BOG compared to a Beverage, I found the BOG to be almost
useless compared to the Beverage. I would put up one of the arrays K9AY,
SAL-30, 4sq rec, etc.
I don't think you will be happy with a BOG after using a Beverage.

Chuck W5PR

On Thu, Aug 1, 2019 at 12:08 PM Paul Mclaren <paul.mcl@gmail.com> wrote:

> Just a ‘simple’ question hopefully - How close to the ground should a BOG
> be for best/good performance?
>
> I am looking for any additional info that I can get to supplement what I
> have found online already so good on the balun, wire type and termination
> resistor.
>
> My single unterminated beverage I have at the moment was transformational
> compared to a Wellbrooke loop but the location it is in will soon be 80 new
> homes so time to look elsewhere.  Current plan is a small number (maybe
> three) BOG antennas switched by a remote relay but distance is limited to
> 200ft maximum in any direction.
>
> Plan is to use the BOGs for 160 but also 80,40 and maybe 30m.
>
> Regards
>
> Paul MM0ZBH
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband
> Reflector
>
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
<Prev in Thread] Current Thread [Next in Thread>