You should probably look for a double pole, I’ve been told you need to open the
shield as well....I’ve had similar interference on my hi z array. I’ve opted to
go a different route....
Sent from my iPad
> On Dec 10, 2019, at 11:30 AM, N4ZR <n4zr@comcast.net> wrote:
>
> Now that I've determined that my transmitting antenna must be disconnected,
> in order for my K9AY loop to work successfully, can anyone tell me what sort
> of ratings are required for the relay required to do this remotely? I'm
> assuming a vacuum relay, but in looking at the MGS4U list of available SPST
> relays, there is a huge price range. What sort of numbers should I be
> looking for, given 1.5 KW and location at the base of a quarter-wave inverted
> L.
>
> I also note that most of the relays listed have 26.5 volt coils. Can anyone
> recommend an inexpensive 24-26 volt supply that I can use?
>
> 73, Pete N4ZR
> Check out the Reverse Beacon Network
> at <http://reversebeacon.net>, now
> spotting RTTY activity worldwide.
> For spots, please use your favorite
> "retail" DX cluster.
>
>
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|