RG-17 has the same problem, but the Type LC connector (a giant F connector)
solved the migration problem the same way the F connector does.
73
Frank
W3LPL
----- Original Message -----
From: "Richard (Rick) Karlquist" <richard@karlquist.com>
To: "Lee STRAHAN" <k7tjr@msn.com>, topband@contesting.com
Sent: Wednesday, April 8, 2020 8:59:58 PM
Subject: Re: Topband: RG-6 Delay cables
On 4/8/2020 1:28 PM, Lee STRAHAN wrote:
> Even if the copper center conductor expands, the way the cable connectors are
> made allows the copper to simply push in the connector past the connection
> point maintaining its physical length.
Very astute. You may have explained this paradox.
I didn't think of this type F effect. Some type N
connectors also work this way.
73
Rick N6RK
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|