I contacted Andrew Ikin of Wellbrook to make him aware of this customers
problem.
Andrew asked me to send WW3S a pm with Andrew's contact details so that he can
try to resolve the problem.
73s Tracey G5VU
----- Original Message -----
From: WW3S <ww3s@zoominternet.net>
Reply-To: WW3S <ww3s@zoominternet.net>
To: <topband@contesting.com>
Sent: 02/11/2021 23:56:19
Subject: Topband: magnetic loops, DXE vs Wellbrook
________________________________________________________________________________
I have used a DXE loop (formerly Pixel) for the last couple of seasons
with fairly good success from my small lot. I was able to get a
Wellbrook loop this year as well, and in testing, notice quite a
difference between the two.....the Wellbrook is very noisy compared to
the DXE, and I'm wondering if I have it installed correctly. It seems
pretty straight forward to hook up, but since I dont have the manual,
wondering if there is anything maybe I overlooked.....with the DXE, the
band noise present on my inverted L just about completely disappears
when I switch to the loop, but with the Wellbrook, I notice very little
difference.....any using a Wellbrook that could share some tips/notes?
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|