Towertalk
[Top] [All Lists]

Source for rotor disconnect plugs

To: <towertalk@contesting.com>
Subject: Source for rotor disconnect plugs
From: ab5tv@ix.netcom.com (ab5tv@ix.netcom.com)
Date: Tue, 12 Nov 1996 09:28:17 -0800
Paul Ferguson wrote:
> 
> I am looking for a source for disconnect plugs for a rotor cable and
> for a switch box cable. I need to handle 8 wires in the switch box.
> 
> I see the Wireman carries a product called Powerpole that can be
> configured for up to 8 wires. I have not yet looked in the auto
> stores for "trailer light" type connectors.
> 
> Any recommendations from those who have tried a connector type?
> 
> K5ESW
> Paul
> Paul.Ferguson@pobox.com
> 
> --
> FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 K7LXC@contesting.com
> Sponsored by Akorn Access, Inc & KM9PCATS, 7368 SR 105, Pemberville OH 
> (419)352-4465 markets a nifty plug 
which replaces the 8 pin terminal strip at the bottom of HyGain rotors.  
It has a positive lock and I consider it superior to the Cinch plugs.  
Doesn't cost much but is difficult to install if you have fat fingers.

Regards
Madison
W5MJ

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P

<Prev in Thread] Current Thread [Next in Thread>